Registrador Gráfico GR200210
Características principales:
- Pantalla táctil de alta definición 5.7" 640x480 TFT-LCD
- Entradas múltiples 2 de RTD, 12 de termopar, 4 de DC
- Gran capacidad de memoria
- Entradas para tarjetas de memoria SD y SDHC
- Diferentes vistas de pantalla
- 3 idiomas (Coreano, Mandarín e Ingles)
- Monitoreo remoto por smartphone
 |  |
Suffix code
| Model | Code | Information |
| GR200 - |  | | | Graphic recorder 145(W) x 145(H) x 173.5(D) mm |
| Number of channels | 2 | | | 2 channel |
External contact
input & output
(DI / DO) | 1 | | DI 2 contact + DO 6 contact (relay) |
| Communication | 0 | RS422/485 |
| * Ethernet is available when using our ethernet converter(HMCE). |
Specification
| [ Range configuration for the input types ] |
| Input type | Measurement range(°C) | Measurement range(°F) | Degree |
| Thermoresistor (RTD) | Pt100O | Pt-0 | -200 ~ 640 | -300 ~ 1180 | ±0.15 % of F.S ±1digit |
| Pt-1 | -1 -200.0 ~ 640.0 | -300.0 ~ 1180.0 |
| Pt-2 | -200.00 ~ 640.00 | -300.0 ~ 1180.0 |
| KPt100O | KPt-0 | -200 ~ 500 | -300 ~ 1000 |
| KPt-1 | -200.0 ~ 500.0 | -300.0 ~ 1000.0 |
| KPt-2 | -100.00 ~ 150.00 | -300.0 ~ 1000.0 |
| Thermocouple (TC) | K | K-0 | -200 ~ 1370 | -300 ~ 2500 | ±0.15 % of F.S ±1digit |
| K-1 | -200.0 ~ 1370.0 | -300 ~ 2500 | ±0.15 % of F.S ±1digit(*2) |
| J | -200.0 ~ 1200.0 | -300 ~ 2300 | ±0.15 % of F.S ±1digit(*2) |
| E | -200.0 ~ 1000.0 | -300 ~ 1800 | ±0.15 % of F.S ±1digit(*2) |
| T | -200.0 ~ 400.0 | -300 ~ 750 | ±0.15 % of F.S ±1digit(*3) |
| R | 0.0 ~ 1700.0 | 0 ~ 3100 | ±0.15 % of F.S ±1digit(*4) |
| B | 0.0 ~ 1800.0 | 0 ~ 3300 | ±0.15 % of F.S ±1digit (*1) |
| S | 0.0 - 1700.0 | 0 ~ 3100 | ±0.15 % of F.S ±1digit(*4) |
| L | -200.0 ~ 900.0 | -300 ~ 1300 | ±0.15 % of F.S ±1digit(*2) |
| N | -200.0 ~ 1300.0 | -300 ~ 2400 | ±0.15 % of F.S ±1digit(*3) |
| U | -200.0 ~ 400.0 | -300 ~ 750 | ±0.15 % of F.S ±1digit(*3) |
| Wre 5-26 | 0.0 ~ 2300.0 | 0 ~ 4200 | ±0.15 % of F.S ±1digit(*4) |
| PL-? | 0.0 ~ 1390.0 | 0 ~ 2500 | ±0.15 % of F.S ±1digit |
| VDC | -10 - 20 ? | -10.00 ~ 20.00 | ±0.15 % of F.S ±1digit
* The current input (4~20mA DC)
is available when you use resistance 250? (0.5W/0.1%)
on input terminals |
| 0 - 100 ? | 0.00 ~ 100.00 |
| 1 - 5 V | 1.00 ~ 5.00 |
| 0 - 30 V | 0.00 ~ 30.00 |
| (*1) 0 ~ 400? : ±5% of F.S ± 1digit | (*3) -200 ~ -150°C : ±0.4% of F.S ± 1digit |
| (*2) -200 ~ -150? : ±0.2% of F.S ± 1digit | -150 ~ -100°C : ±0.2% of F.S ± 1digit |
| | (*4) 0 ~ 200°C : ±0.2% of F.S ± 1digit |
| [ Specification for the input ] |
| VDC | Thermocouple (TC) | K, J, E, T, R, S, B, N | IEC 584 |
PL-Ⅱ, Wre 5-26
| ASTM E988 |
| U, L | DIN 43710, IEC 751 |
| Thermoresistor (RTD) | Pt100 Ω | DIN IEC 751 |
| KPt100 Ω | JIS C1604-1989 (OLD) |
| Power voltage | 100 - 240 V AC Voltage fluctuation rate ±10 % |
| Power frequency | 50 - 60 Hz |
| Power consumption | 22 VA max |
| Maximum internal fuse ratings | 250 V AC |
| Internal voltage | Primary terminal* and secondary terminal** : Minimum 1500 VAC for 1 minute
Primary terminal* and FG terminal : Minimum 1500 VAC for 1 minute
Secondary terminal** and FG terminal : Minimum 1500 VAC for 1 minute
Secondary terminal** and secondary terminal** : Minimum 500 VAC for 1 minute
* Primary terminal : Power terminal (except the FG terminal) and the relay output terminal
** Secondary terminal : Sensor input terminal, contact input terminal, communication terminal |
| Insulation resistor | 20 ? between the power terminal and the FG terminal or 500 VDC |
| Number of channels | 2, 4, 8, 12 (Refer to the type configuration) |
| Input type | 2 thermoresistors (Pt-100, KPt-100) 12 thermocouples (K, J, E, T, R, B, S, L, N, U, Wre 5-26, PL-II) 4 VDC (-10 - 20 mV, 0 - 100 mV, 1 - 5V, 0 - 30 V) |
| Sampling period | 250 ms |
| Current to measure the thermoresistor (RTD) | About 0.21 mA |
| Input resistor | Thermocouple : More than 1 ㏁, VDC : More than 1 ㏁
|
| Allowable wiring resistor | Thermoresistor : Maximum 100Ω/wire (The RTD is up to 10Ω/wire for the range of -100.00 - .150.00) Thermocouple : Less than 200 Ω VDC : Less than 2 ㏀
|
| Impact of the wiring resistor | Thermoresistor : ±0.3 °C/10 Ω (The 3 lines have the same wiring resistors)
|
| Allowable input voltage | Thermocouple : Less than ±10 V DC, VDC : Less than ±33 V DC |
| Degree | ±0.15 % of F.S, ±1 digit (Except the RJC temperature error) ? Refer to the input table |
| The error in the reference junction compensation (RJC) | ±2.0 ? (0 ~ 50 °C) |
| Sensor short detection (Burn-out) | UP-Scale for the short |
| Maximum input | 4 |
| Input method | No voltage contact input |
| On/Off detection resistor | Consider on less than 1 ㏀ minimum and off larger than 10 ㏀
|
| Minimum detection time | 0.25 second |
| Maximum number of outputs | 12 |
| Output type | Relay output |
| Maximum ratings | 5 A 250 V AC, 5 A 30 V DC |
| Recommended ratings | 3 A 250 V AC, 3 A 30 V DC |
| Relay life | 50,000 times at the maximum ratings, 100,000 times at the recommended ratings |
| Display | TFT color LCD
(115.2 × 86.4 mm, resolution : 640 × 480 pixel, LED Backlight) |
| Backlight life | 40,000 hours |
Language in use | Korean, English, Chinese (simplified) |
| Save function | Internal memory - volatile memory : 900 KB - Save up to 4 hours with the interval of 1 second - Non-volatile memory : 80 MB . Save up to 15 days with the interval of 1 second External memory - SD card (2GB) : Save up to a year with the interval of 1 second * Support the SDHC |
| Save period | User configuration (1, 2, 5, 10, 20, 30, 60, 120 seconds) |
| Memory information | Measurement from each channel, Burn-out, DI (contact input), ALARM, relay output status |
| Ambient temperature | 0 ~ 50 °C |
| Temperature change | 10 °C/h or below |
| Ambient humidity | 20 ~ 90 % RH (no condensation) |
| Ambient temperature | -20 ~ 70 °C |
| Temperature change | Less than 20 °C/h |
| Ambient humidity | 5 - 95 % RH (no condensation) |
| [Impact from the ambient temperature] |
| VDC, thermocouple sensor | ±0.01 % of F.S / °C |
| Thermoresistor sensor | ±0.06 °C/°C |
