Sensor de Área PAN40T10N
Características principales:
- Altura desde 12cm hasta 95cm
- Modo de selección de operación
- Protección contra corto circuito y sobre corriente
- Diferentes distancias de eje óptico (10/20/40 mm)
- Función de prevención de interferencia mutua
| |
Suffix code
Model | Code | Information |
PAN - | | | | | Area sensor |
Optical axis pitch | 40 | | | | 40 ㎜ gap |
Sensing method | T | | | Trough Beam |
Number of optical axes | | | Number of optical axis (please refer to the dimension) |
Output | N | NPN open collector |
Specification
Type | PAN20-TN | PAN40-TN |
PAN20-TP | PAN40-TP |
Appearance | |
Detection | Through-Beam |
Sensing distance | 7 m |
Detectable object | opaque object Ø above 32 mm | opaque object Ø above 52 mm |
Optical axis pitch | 20 mm | 40 mm |
Power Supply | 12 ~ 24 V DC ± 10 % (Ripple P-P : Max. ± 10 % ) |
Current Consumption | Below 170 mA | Below 100 mA |
Output | NPN/PNP open collector output, max 100 ㎃ (30 V d.c) | Inductive load : 50 ㎃, Remaining voltage : 0.5 V d.c max |
|
Operation Mode | Transmitter : select the master/slave operation (mutually preventing interference function) | Receiver : A mode (ON when all optical axis L.ON) | O mode (select ON when 1 optical axis L.ON) |
|
Response Time | Below 15 ms | Below 7 ms |
Light source of Emitter | Infrared LED (wave 950 mm) |
LED Indicator | Transmitter : Power indicator(Green LED), M/S display(Red LED) | Receiver : Light on stability display(Green LED), output Display(Red LED) | E1 display(Red LED), E2 display(Blue LED) |
|
Material | Case: Aluminum, Window : acryl, Lens : acryl |
Operation S/W | Trns : M/S Operation convertion S/W, Rcvr : A/O Operation convertion S/W |
Protection | Interference protection (M/S MODE), Output protection |
Ambient illumination | Sunlight : max 10,000 Lux, Incandescent lamp : max 3,000 Lux |
Ambient temperature | -10 ~ 55 ℃ (Surrounding storage temperature : -25 ~ 70 ℃) |
Ambient humidity | 35 ~ 85 % R.H. (With no condensation) |
Vibration resistance | 110 - 55 ㎐, Double amplitude : 1.5 ㎜, for 2 hours in X, Y and Z direction |
Case protection | IP65 (IEC) |
Dielectric Strength | 500 V a.c 50/60 ㎐ for 1 min |
Connect Method | Connector code extended type, code length : 200 ㎜, | Number of wires : 5P, Dimension : Ø5.5 ㎜ connector |
|
* | Please take precautions since the detection distance can vary depending on the size and surface condition |
| of the detected object and the presence of gloss. |
* | PAN20-TL8 (light projector) and PAN20-TR8N (Receiver) comprise one set of PAN20-T8N. |
* | PAN40-T32 is customizing product |