PL-D2B - Hanyoung - Sensores Fotoeléctricos

Fabricante: Hanyoung Nux
Código de Producto: PL-D2B
Existencia: Disponible

Descripción

Sensores Fotoeléctricos PL-D2B

Características principales:
- IP65
- Distancia de detección: 2mm
- Detección estable, es posible detectar por colores o calidad del objeto
- Protección contra corto circuito e inversión de polaridad
- Selección de la distancia de detección, tipo y función BSG

Specification

Model	PL-D2B
Sensing method	Distance-settable
Sensing distance	0.2 ~ 2 m
Detecting object	200 X 200 ㎜ White paper with no gloss
Power supply voltage	12 - 24 V d.c ±10 %
Current consumption	30 ㎃ max.
Control output	NPN / PNP open collector asynchronously, Load current : 150 ㎃ d.c max. (Resistive load) NPN remaining voltage : 1 V d.c max., PNP remaining voltage Max : 2 V d.c
Operation mode	Light ON / Dark ON ※ Selectable by the mode V/R
Response time	2 ㎳ max.
Hysteresis	Less than 10% of the sensing distance
Light source(Wave length)	Infrared lightening LED (880 nm)
Receiving part	2 photo diodes
Display	Control out display: Red LED, Stability display: Green LED
Distance setting	Near/Far: Optical distance adjusting volume 5 cycles.
Protection circuit	Power reverse connection protecting circuit and output break protecting circuit
Ambient illumination	Sunlight : 11,000 lx max., Incandescent lamp : 3,000 lx max.
Ambient temperature	Operation : -20 ~ 60 ℃, Storage : -25 ~ 70 ℃ (Without freezing)
Ambient humidity	35 ~ 85 % RH (Without condensation)
Protective structure	IP 65
Insulation resistance	20 ㏁ min.(500 V d.c Mega)
Dielectric strength	1000 V a.c (50/60 Hz for 1 min)
Vibration resistance	10 - 55 Hz, double amplitude :1.5mm for 2 hours each in X. Y and Z directions.
Shock resistance	500 ㎨ 3 times each in X. Y and Z directions.
Connection method	Cable output type, Number of wires: 4P, Thickness:Ø 4mm, Length 2m
Material	Case : PC, Lens : PC
Accessory	Bracket, Adjustable driver, bolt, Nut.