TH500 - Hanyoung - Control de Temperatura y Humedad Digital
- Fabricante: Hanyoung Nux
- Código de Producto: TH500
- Existencia: Disponible
Control de Temperatura y Humedad Digital TH500
Características principales:
- Pantalla táctil a color LCD
- Control preciso
- Máximo 100 patrones (máximo 2,000 segmentos)
- Control PID de temperatura y humedad independiente
- Diferentes alarmas
- Entrada digital (DI): 8 contactos, Salida digital (DO): 20 contactos
- Comunicación RS232, RS422/ RS485
Suffix code
Model | Code | Information | |||||||||
TH500 | Programmable temperature & humidity controller | ||||||||||
Types | 1 | Standard type |
| ||||||||
2 | Additional type |
| |||||||||
N | - | No body part | |||||||||
Additional type board (optional) | 1 | Input/Output board-1 (12 contacts relay output), Temperature/Humidity control output (SSR/SCR drive) (DI : 8 contacts, D.O : 12 contacts relay output external power supply) 24 V d.c, 18 W | |||||||||
2 | Input/Output board-2 (8 contacts open collector output external terminal board) | ||||||||||
3 | Input/Output board-3 (8 contacts relay output board) | ||||||||||
4 | Input/Output board-1 + (output board-2) | ||||||||||
5 | Input/Output board-1 + (output board-3) | ||||||||||
N | No output board (when selected the main body) | ||||||||||
Language | N | Korean / English (Standard type) | |||||||||
2 | English / Chinese (Simplified Chinese Characters) | ||||||||||
3 | English / Chinese (Traditional Chinese Characters) | ||||||||||
4 | Korean / Chinese ( Simplified Chinese Characters) | ||||||||||
5 | Korean / Chinese (Traditional Chinese Characters) |
Specification
[Input] |
Temperature sensor(Dry) | RTD (Pt100 Ω) or 0 - 5 V DC * 4 - 20 mA DC (External resistance 250 Ω) * Pt100 Ω (IEC 751) | |
Humidity sensor(Wet) | ||
Sampling time | 500 ms | |
Measurement range | Temperature range : -100.00 ~ 200.00 °C | |
Humidity range : 0.00 ~ 100.00 % RH | ||
Digital Input (DI) | Total 8 contacts (1a 4 contacts x 2), 8 V DC 10 mA max | |
Allowable wiring resistance | Less than 10 Ω / 1 wire (Resistance value of 3 wires must be same) | |
Input impedance | Approx. 1 ㏁ (DC voltage input) | |
Allowable signal source resistance | Approx. less than 2 ㏀ (DC voltage input) | |
input displaying resolving power | Generally less than the decimal point of range |
[Ferformance] |
Display accuracy | Temperature (?) : ±0.2 % of FS Humidity (%RH) : ±2 % of FS | |
Insulation resistance | Above 20 ?, 500 V DC (primary terminal-secondary terminal-between the earths) | |
Dielectric strength | 2500 V AC, 60 Hz, For 1 minute (primary terminal-secondary terminal-between the earth terminals) |
[Standard specification] |
Power supply voltage | 100 - 240 V AC, 50 - 60 Hz |
Percentage of voltage fluctuation | ±10 % of Power supply voltage |
Power consumption | 20 VA |
Ambient temperature | 0 ~ 50 °C |
Ambient humidity | 20 ~ 90 % RH (Under the condition of no dew formed) |
Storage temperature | -25 ? ~ 70 °C |
Vibration resistance | 10 - 55 Hz, Amplitude 0.75 mm, 3 direction, 4 times, 5 min/cycle |
Shock resistance | 147 ㎨, To the direction of 3 for 3 times |
Dimension | 183(W) x 96(H) x 94(D) |
Weight | Approx. 2.35kg (included the weight of box) |
[Control function] |
Input | Input compensation (sensor bias) | temperature 1 contact : -100.00 ~ +100.00 °C Humidity 1 contact: -100.00 ~ 100.00 % RH |
Dry/wet bulb sensor compensation | Remove the gauze from wet bulb sensor and compensate the difference between the wet and dry bulb sensor. | |
Scaling | DC Voltage (V DC) : Input scaling depending on the conversion range. | |
Input filter (LPF) | 2 ~ 180 sec | |
Detection Input break | UP scale, Stop operation when exceeded ±5 % of range limit. | |
Control mode | Operation method selection | fixed control/Select programmable control |
Control output | Temperature control output | SSR output or SCR (2 - 20 mA DC) output selection |
Humidity control output | ||
Control action | Pattern | 100 patterns (1 pattern / 100 segments) |
Segment | 2,000 segments max. | |
PID group | 16 group (4 temperature zones X 4 humidity zones) | |
Auto tuning | Auto tuning by the target set value | |
Proportional band | 0.00 ~ 100.00 % (ON / OFF control when 0.00 %) | |
Integral time | 0.00 ~ 6,000 sec (OFF state with 0 sec sestting) | |
Derivative time | ||
ON/OFF control | Set proportional band (P.B) as0.0 | |
Direct/reverse control | Depends on selection of direct/reverse action of control output. | |
Hysteresis | Temperature 0.1 ~ 300 °C, humidity 0.1 ~ 100% | |
Retransmission Output | Temperature & humidity | 4 - 20 mA DC Select among the present value(PV), set value(SV), and output value (MV) |
Scaling | Auto scaling within set range (4 - 20 mA DC) | |
Alarm setting | Set alarm | System alarm : 4 contacts. 4 contacts per pattern, ON/OFF set function per segment |
Alarm type | High/low alarm, High/low deviation alarm and etc (20 kinds) | |
Absolute alarm set range | Temperature : -100.00 ~ 200.00 °C Humidity : 0.0 ~ 100.0 % RH. | |
Deviation alarm set range | Temperature : -300.00 ~ 300.00 °C Humidity : -100.0 ~ 100.0 % RH. | |
Hysteresis | Temperature : - 0.0 ~ 300.0 °C Humidity : 0.0 ~ 100.0 % RH. | |
Power backup memory | Saving device | Internal flash and FRAM, Temperature & Humidity each 86,400 point. |
Saving function | Program information, SV backup and restoration, Set value for temp & humidity, PV |
[Output] |
Control output (DO) | Relay contact 12 contacts | N.O : 30 V DC 5 A max, 250 V AC 5 A max |
N.C : 30 V DC 1 A max, 250 V AC 2 A max | ||
Open collector 8 contacts | 24 V DC 300 mA max | |
Control output | SSR output | ON : 24 V DC. pulse voltage (load resistance 800 Ω min) OFF : less than 0.1 V DC proportion cycle : 1 - 1000 sec Output limit : - 5.00 ~ 105.00 % Time resolving power : smaller one between 0.1 % and 10 ms |
Current output | 4 - 20 ? DC (3.2 - 20.8 mA DC) renewal time : 500 ms load resistance : 600 Ω max output limit : - 5.00 ~ 105.00% | |
Retransmission output | Temperature & humidity | 4.0 - 20.0 mA DC |
output renewal time | 500ms | |
Resistive load | less than 600 Ω | |
output limit | - 5.00 ~ 105.00 % | |
output types | PV, SV, MV free choice | |
Resolving power | approximately 8,000 | |
Renewal time | 500ms |
[Monitor specification] |
Screen standard | Color STN LCD (115.17 x 86.37 mm) |
Number of Pixels | 320 x 240 Pixel, 256 Colors |
Back light | CCFL |
Back light life | About 20,000 h |
Touch type | Resistive Overlay type (4 wires) |
Language | Korean / English English / Chinese (Simplified Chinese Characters) English / Chinese (Traditional Chinese Characters) Korean / Chinese ( Simplified Chinese Characters) Korean / Chinese (Traditional Chinese Characters) |
[Communication] |
Applicable rating | EIA - RS232, RS485/422, USB V1.1 | |
Max number of connection | RS232 | 1 : 1 |
RS485/422 | 1 : 32(address 1 ~ 999) | |
Communication type | RS232 | Full Duplex |
RS485/422 | 2 wires type half Duplex | |
Synchronous type | RS485/422 | Asynchronous mode |
Communication distance | USB V1.1 | approximately within 1 m |
RS232 | approximately within 10 m | |
RS485/422 | approximately within 1.2 km | |
Commincation speed | USB V1.1 | approximately 1 Mbps |
RS232, RS485/422 | 9600 / 19200 / 38400 / 57600 / 115200 BPS | |
Data Length | RS232, RS485/422 | 7/8 Bits |
Parity Bit | RS232, RS485/422 | NONE / EVEN / ODD |
Stop Bit | USB V1.1 | 1 / 2 Bit(s) |
Protocol | RS232, RS485/422 | PCLINK / PCLINK + CRC / MODBUS - RTU |
Response Time | RS232, RS485/422 | 0 ~ 999 (ms) |
Etiquetas: TH500